Complete DAKTON - UNIPRO support kit
€60,50Complete DAKTON - UNIPRO support is mounted on the handlebars and then the lap timer is mounted in the center hole on the support.
Unipro Laptimer
-
-
-
-
Unipro Exhaust Junction Cable 6003-7003
€59,29Unipro Exhaust Junction Cable 6003-7003
Connection cable for the professional exhaust sensor.
-
Unipro Exhaust Temperature Sensor Professional
€198,45Unipro Exhaust Temperature Sensor Professional
-
-
Unipro Loop IR Receiver 6003
€95,59Unipro Loop IR Receiver 6003
The receiver is activated by the infrared beam emitted by the Unipro IR transmitter. It can be used when it is not possible to use a loop or magnetic receiver.
-
Unipro Unigo Water Temperature Sensor
€68,00Unipro Unigo Water Temperature Sensor
Sensor for measuring cooling water temperature.
Used for: Measuring cooling water temperature. -
Unipro 6003 Big Kit
€821,59Unipro 6003 is identical with the Unipro 7003, except the fact that the 6003 "only" stores two hours of data logging, where the 7003 stores 8 hours 45 minutes. 6003 is both a Laptimer and a Data Logger It means that the driver as well as the mechanics can see and analyze results directly in...
-
-
-
-
Unipro Fittings for Exhaust Sensor
€6,05Unipro Fittings for Exhaust Sensor. This fitting for the exhaust sensor must be welded to the exhaust.
The bracket is welded to the exhaust at 12 cm from the back of the piston. In this way, the exhaust gas sensor measures the gas and not the flame temperature.
-
-
-
Unipro RPM Sensor 2 Stroke
€67,76Sensor for measuring the speed of 2-stroke engines.
This active RPM sensor is a small sensor that is mounted on the spark plug cable between the ignition coil and the spark plug. The sensor is attached with strips. This active RPM sensor consists of nothing less than 21 components mounted on either side of a small circuit board on the tube. This active sensor feeds the Laptimer with a clean stream of ignition pulses. Combined with the advanced digital filtering in the Laptimer, this sensor plays an important role in giving the best RPM measurement on the market. The RPM sensor is made with a high quality cable and connector and is molded to prevent moisture from entering the electronics.
-
Unipro Speed Kit Front Wheel - Speed Sensor
€150,04Unipro Speed Kit Front Wheel - Speed sensor is a speed kit that allows you to measure speed and split, optionally installed with the Unipro 6003 Laptimer. Very high precision with 6 magnets per revolution, which typically gives a resolution of only 14 cm, and the speed sensor gives an accuracy of 0.5% from 0 to 350 KMH.
-
Unipro Speed Kit Rear - Speedometer
€150,04Unipro Speed Kit Rear - Speedometer Unipro Speed Kit Rear - Speedometeris a speed kit that allows to measure speed and split. Very high precision with 6 magnets per revolution, which typically gives a resolution of only 14 cm, and the speed sensor gives an accuracy of 0.5% from 0 to...
-
-
-
Unipro Splitter 1 speed sensor connection for UniGo
€51,00Unipro Splitter 1 speed sensor connection for UniGo. This splitter can be used for all inputs except temperature. For example, it can be used to split the RECV input on the UniGo into a receiver and speed input.
-
Unipro T-Junction with 17mm Connections (for Water Temp. Sensor)
€18,15Unipro T-Junction with 17mm Connections (for Water Temp. Sensor)
-
Unipro USB for UniGo
€45,00The USB cable is used for data transfer from a UniGo Laptimer to a computer. The transfer includes all data in the Laptimer, i.e. lap times, settings and all recorded data.
-
-
Unipro Water Temperature Sensor Complete
€81,07Unipro Water Temperature Sensor Complete is a sensor for measuring the cooling water temperature.
Unipro is a Danish company that invented the Laptimer in 1986. A technological breakthrough that has since found its way from gokarts to Champcars.
Unipro has pioneered and supplied products to active racing drivers around the world since the beginning in 1986.
The top models in the new product line are prepared for many feature enhancements to ensure customers a great return on their investment.
Unipro's main focus continues to be developing high-quality lap timers and data logging for kart drivers and teams around the world.