Speedwear NV

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Cutting-edge protection and revolutionary external structure features ultra low profile design for maximum control and minimal weight at the lower section of the boot, while its upper design has been developed for controlled flexibility, streamlined profile and superior grip against the bike. Lightweight upper combines full-grain leather with impact and abrasion resistant PU shell for unmatched levels of safety. PU guards the toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. Innovative PU spine protects the heel, controls flex brace provides the ultimate in support and safety. Torsion bars control ankle and leg rotation, while allowing freedom of movement. Wide fit torsion bars replacement are included. These allow the rider to customize the internal ankle brace, adapting the ankle width. This inner structure features PU protection and shock absorbing padding on the heel and ankles and an ultra thin and flexible forefoot area for increased sensitivity and control. Perforated liner is washable and replaceable. Ultra comfortable and precision fit interior features new poly fabric lining with open cell foam and a shock absorbing shin pad. Outer side of the boot features anti-torsion PU panel on the ankle for flexibility and support. New PU gasket seals water out of the boot. White model features airflow ventilation system. Advanced new and exclusive dual comound sole is seamslessly integrated to the multi-density foot base structure with built-in support. Sole provides superior durability, grip, feel and a high level of structural rigidity. Advanced closure system features thre memory, a quick release/locking system and a self-aligning design for easey and precise closure. Three buckle system to match boot graphics. Inner side of the boot is designed for maximum grip against the bike from top to bottom and features PU panels for heat and abrasion resistance. Available in a range of fresh, complimentary colors with Grahics kits to match and update. The Tech 10 boot is CE certified.

For the development team working on the Tech 10, several key objectives were apparent at the outset of refinements to this revolutionary concept have been made ever since. The first abjective was to improve the performance of the boot's safety structure over existing technologies. More traditional boots have ankle protection and support built inside their construction and to improve on the concept and bring the protection closer to the body, a new inner brace was developed. Having discarded the use of a single hinge boot system, (a concept Alpinestars had developed and patented designs for the mid-80's, but never adopted because of excessive stress put on the knee) a revolutionary solution was developed. Using some of the lessons learned in the company's road racing program, where the Alpinestars Supertech boot leads the way with its unique torsion bar ankle support, the new MX brace features a patended double-hinged assembly. However, the Tech 10 brace shares no common components with the Supertech version, having been designed speciffically to cope with the particular demands of MX riding and has already been through several design modifications to yet further improve persormance. The double inge torsion bars allow upper and lower protective structures in the brace to protect the ankle and heel, while giving complete freedom, flexibility and feel to the rider by following the natural movements of the foot and ankle, with no constraint until the point of over extension. Wide fit torsion bars allow for ankle fit adjustement and riding comfort. The system also minimizes the chances of sprains and twists, while also protection the ankle from lateral impacts. It is comfortable to wear, extremely strong, stable and lightweight while allowing ventilation around the foot.

Alpinestars exclusieve lasted fit troughout the full-grain leather upper with redesigned flex panels for improved flexibility. Closure system featuring 4 aluminium buckles with memory and a quick release/locking system with self-alighning design for easy, precise closure. Top and bottom reverse closure design feature provides superior impact avoidance and fit. TPU soft gaiter at the top of the boot effectively seals out elements. Contoured shin plate protector is injected with high modulus TPU for a high level of impact and abrasion resistance with additional holes increase ventilation. New replaceable shock absorbing material on the shin and instep. Extended inside plate is injected with medium hard TPU and guards the side and toe-box area of the boot. The inner side of the boot is designed for excellent contact and grip against the bike and provides a high level of support. Instep and achilles flex zones for superior comfort, control and support. Contoured calf protector plate is injected with high modulus TPU for impact resistance. Stamped steel heel guard. Stainless steel sole guard. Stamped suede panel on the inner side of the boot increases grip and is laminated with aluminium foil to guard against heat. Breathable Cambrelle lining reduces the buildup of heat. White model features a new ventilation system positioned to improve air circulation. Leather upper. Removable and fully perforated leather bootie for a precise fit, with asymmetrical gel ankle protectors and a remobable anatomic footbed. Patented inner bootie with additional shock absorbing gel insert for the heel. Extended front inner gaiter helps prevent water entry. The Tech 8 boot is CE certified.

Alpinestars exclusieve lasted fit troughout the full-grain leather upper with redesigned flex panels for improved flexibility. Closure system featuring 4 aluminium buckles with memory and a quick release/locking system with self-alighning design for easy, precise closure. Top and bottom reverse closure design feature provides superior impact avoidance and fit. TPU soft gaiter at the top of the boot effectively seals out elements. Contoured shin plate protector is injected with high modulus TPU for a high level of impact and abrasion resistance with additional holes increase ventilation. New replaceable shock absorbing material on the shin and instep. Extended inside plate is injected with medium hard TPU and guards the side and toe-box area of the boot. The inner side of the boot is designed for excellent contact and grip against the bike and provides a high level of support. Instep and achilles flex zones for superior comfort, control and support. Contoured calf protector plate is injected with high modulus TPU for impact resistance. Stamped steel heel guard. Stainless steel sole guard. Stamped suede panel on the inner side of the boot increases grip and is laminated with aluminium foil to guard against heat. Breathable Cambrelle lining reduces the buildup of heat. White model features a new ventilation system positioned to improve air circulation. Leather upper. Removable and fully perforated leather bootie for a precise fit, with asymmetrical gel ankle protectors and a remobable anatomic footbed. Patented inner bootie with additional shock absorbing gel insert for the heel. Extended front inner gaiter helps prevent water entry. The Tech 8 boot is CE certified.

Alpinestars exclusieve lasted fit troughout the full-grain leather upper with redesigned flex panels for improved flexibility. Closure system featuring 4 aluminium buckles with memory and a quick release/locking system with self-alighning design for easy, precise closure. Top and bottom reverse closure design feature provides superior impact avoidance and fit. TPU soft gaiter at the top of the boot effectively seals out elements. Contoured shin plate protector is injected with high modulus TPU for a high level of impact and abrasion resistance with additional holes increase ventilation. New replaceable shock absorbing material on the shin and instep. Extended inside plate is injected with medium hard TPU and guards the side and toe-box area of the boot. The inner side of the boot is designed for excellent contact and grip against the bike and provides a high level of support. Instep and achilles flex zones for superior comfort, control and support. Contoured calf protector plate is injected with high modulus TPU for impact resistance. Stamped steel heel guard. Stainless steel sole guard. Stamped suede panel on the inner side of the boot increases grip and is laminated with aluminium foil to guard against heat. Breathable Cambrelle lining reduces the buildup of heat. White model features a new ventilation system positioned to improve air circulation. Leather upper. Removable and fully perforated leather bootie for a precise fit, with asymmetrical gel ankle protectors and a remobable anatomic footbed. Patented inner bootie with additional shock absorbing gel insert for the heel. Extended front inner gaiter helps prevent water entry. The Tech 8 boot is CE certified.

Alpinestars exclusieve lasted fit troughout the full-grain leather upper with redesigned flex panels for improved flexibility. Closure system featuring 4 aluminium buckles with memory and a quick release/locking system with self-alighning design for easy, precise closure. Top and bottom reverse closure design feature provides superior impact avoidance and fit. TPU soft gaiter at the top of the boot effectively seals out elements. Contoured shin plate protector is injected with high modulus TPU for a high level of impact and abrasion resistance with additional holes increase ventilation. New replaceable shock absorbing material on the shin and instep. Extended inside plate is injected with medium hard TPU and guards the side and toe-box area of the boot. The inner side of the boot is designed for excellent contact and grip against the bike and provides a high level of support. Instep and achilles flex zones for superior comfort, control and support. Contoured calf protector plate is injected with high modulus TPU for impact resistance. Stamped steel heel guard. Stainless steel sole guard. Stamped suede panel on the inner side of the boot increases grip and is laminated with aluminium foil to guard against heat. Breathable Cambrelle lining reduces the buildup of heat. White model features a new ventilation system positioned to improve air circulation. Leather upper. Removable and fully perforated leather bootie for a precise fit, with asymmetrical gel ankle protectors and a remobable anatomic footbed. Patented inner bootie with additional shock absorbing gel insert for the heel. Extended front inner gaiter helps prevent water entry. The Tech 8 boot is CE certified.